加入收藏
您好,欢迎光临龙泰焊接科技(苏州)有限公司官方网站!
0512-68653444
龙泰焊接科技(苏州)有限公司
焊材订购咨询专线
LONGTAI WELDING TECHNOLOGY SUZHOU CO.,LTD.
产品信息
上海斯米克焊材
wKhQUVX7hjmEQttbAAAAACF5lS4096.jpg

由于产品型号众多,网站不能全部展示,更多型号请来电咨询!


Category
 

Trade-mark
牌号

Specification
  

Melting
Point
熔点()

Chemical
composition
主要成份(%)

Application
 


Equivalent
to AWS
相当AWS


Copper
zinc

铜锌

L103

Wire & rod

885-888

Cu54 Zn Rem.

Brazing of copper, bronze and steel, subjected to low  load.
钎焊铜、青铜和钢等受力不大工件


L104

Foil

890-930

Cu57 Mn2
Co2 Zn Rem.

Brazing of carbide cutting tool.
钎焊硬质合金刀具



Copper
phosphorus


 

L201

Cast rod, wire & rod, powder
铸条、丝、粉

710-800

P7 Cu Rem.

Brazing of copper and copper alloys.
钎焊铜及铜合金

BCuP-2

L204

Cast rod, wire
铸条、丝  

640-815

P5 Ag15
Cu Rem.

Brazing of copper, copper alloys, silver and molybdenum  etc.
钎焊铜及铜合金、银、钼等金属。

BCuP-5

L205

Cast rod, wire & rod, powder
铸条、丝、箔

640-800

P6 Ag5
Cu Rem.

Brazing of copper and copper alloys.
钎焊铜及铜合金

BCuP-3

L207

Cast rod, wire & rod
铸条、丝

640-770

P7 Ag5
Cu Rem.

Brazing of copper and copper alloys.
钎焊铜及铜合金

BCuP-7

L209

Cast rod, wire
铸条、丝  

684-710

P7 Ag2
Cu Rem.

Brazing of copper and copper alloys.
钎焊铜及铜合金。

BCuP-6


 Silver
base


L302

Wire & rod

745-775

Ag25 Cu40
Zn Rem.

Brazing of copper, copper alloys, steel and stainless steel  etc.
钎焊铜及铜合金、钢及不锈钢等


L303

Wire & rod

660-725

Ag45 Cu30
Zn

Brazing of copper, copper alloys, steel and stainless steel  etc.
钎焊铜及铜合金、钢及不锈钢等

BAg-5

L303F

Flux coated rod
涂药丝  

660-725

Ag45 Cu30
Zn Rem.

L303 coated with flux, the same application as L303.
外涂钎剂的L303,用途与L303相同

BAg-5

L304

Foil

690-775

Ag50 Cu34
Zn Rem.

Brazing of copper, copper alloys and steel etc.
钎焊铜及铜合金、钢等

BAg-6

L308

Wire & rod

779-780

Ag72 Cu Rem.

Brazing of copper and nickel under vacuum or reducing  protective atmosphere.
铜和镍的真空或还原保护气氛钎焊  

BAg-8

L312

Wire & rod

595-605

Ag40.Cu.Zn.Cd

Brazing of copper, copper alloys, steel and stainless steel  etc.
钎焊铜及铜合金、钢及不锈钢等


L313

Wire & rod

625-635

Ag50.Cu.Zn.Cd

Brazing of copper, copper alloys, steel and stainless steel  etc.
钎焊铜及铜合金、钢及不锈钢等

BAg-1a

L321

Wire & rod

615-650

Ag56.Cu.Zn.Sn

Brazing of copper, copper alloys, steel and stainless steel  etc.
钎焊铜及铜合金、钢及不锈钢等

BAg-7

L323

Wire & rod

665-755

Ag30.Cu.Zn.Sn

Brazing of copper, copper alloys, steel and stainless steel  etc.
钎焊铜及铜合金、钢及不锈钢等


L325

Wire & rod

645-685

Ag45.Cu.Zn.Sn

Brazing of copper, copper alloys, steel and stainless steel  etc.
钎焊铜及铜合金、钢及不锈钢等

BAg-36

L326

Wire & rod

650-720

Ag38.Cu.Zn.Sn

Brazing of copper, copper alloys, steel and stainless steel  etc.
钎焊铜及铜合金、钢及不锈钢等

BAg-34


Aluminum base

铝基

L400

Cast rod, wire & rod
铸条、丝

577-582

Si11.5
Al Rem.

Brazing of aluminum and aluminum alloys.
铝及铝合金的钎焊

BAlSi-4

L401

Cast rod
铸条

525-535

Si5 Cu28
Al Rem.

Brazing of aluminum and aluminum alloys.
铝及铝合金的钎焊



Tin lead

L600

Wire & rod

183-185

Sn60 Sb0.8
Pb Rem.

Soldering of fusible metals and heat-treated part.
易熔金属及热处理件的钎焊

60Sn

L601

Wire & rod

183-227

Sn18 Sb2
Pb Rem.

Soldering of copper, copper alloys and galvanized iron plain  sheet.
铜及铜合金、镀锌铁皮的钎焊。

18Sn

L602

Wire & rod

183-256

Sn30 Sb2
Pb Rem.

Soldering of copper, brass, copper alloys and galvanized iron  plain sheet.
铜、黄铜、铁、镀锌铁皮的钎焊

30Sn

L603

Wire & rod

183-235

Sn40 Sb2
Pb Rem.

Soldering of copper, copper alloys, steel and zinc  parts.
铜及铜合金、钢、锌制零件的钎焊

40Sn

L604

Wire & rod

183-222

Sn90 Sb0.15
Pb Rem.

Soldering of copper and steel for food and medicine  field.
食品、医疗所需铜、钢等金属的钎焊

90Sn

L605

Wire & rod

232-240

Ag5 Sn95

Soldering of copper and steel for electrical and food  field.
电器、食品所需铜、钢等金属的钎焊


L608

Wire & rod

295-305

Sn5.5 Ag2.5
Pb Rem.

Soldering of copper, copper alloys, steel and stainless  steel.
铜及铜合金、钢及不锈钢的钎焊


Nickel base

镍基

L702

Powder

970-1000

Cr7 B3 Si4
Ni Rem.

Brazing of stainless steel under vacuum or protective  atmosphere.
不锈钢真空或保护气氛钎焊

BNi-2





Gas
welding

CJ301

Copper gas welding flux
铜气焊熔剂

Melting point is about 650,  flux for gas welding and brazing of copper and copper alloys.
熔点约650℃,铜及铜合金气焊或钎焊的助熔剂

CJ401

Aluminum gas welding flux
铝气焊熔剂

Melting point is about 560,  flux for gas welding of aluminum and aluminum alloys.
熔点约560℃,铝及铝合金气焊的助熔剂


Silver
brazing

QJ101

Silver brazing flux
银钎焊熔剂

Brazing flux of copper, copper alloys, steel and stainless  steel within 550-750.
550-750℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

QJ102

Silver brazing flux
银钎焊熔剂

Brazing flux of copper, copper alloys, steel and stainless  steel within 600-850.
600-850℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

QJ102A

Silver brazing flux
银钎焊熔剂

Brazing flux of copper, copper alloys, steel and stainless  steel within 600-850. Non  agglomeration.
600-850℃范围钎焊铜及铜合金、钢及不锈钢。不易结块

QJ112

Silver brazing paste flux

膏状银钎焊熔剂

Brazing flux of copper, copper alloys, steel and stainless  steel within 600-850.
600-850℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

QJ103

Silver brazing flux
银钎焊熔剂

Brazing flux of copper, copper alloys, steel and stainless  steel within 550-750.
550-750℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

Aluminum brazing

铝钎焊

QJ201

Aluminum brazing flux
铝钎焊熔剂

Brazing flux of aluminum and aluminum alloys within  450-620.
450-620℃范围钎焊铝及铝合金的助熔剂

QJ207

Aluminum brazing flux
铝钎焊熔剂

Brazing flux of aluminum and aluminum alloys within  560-620.
560-620℃范围钎焊铝及铝合金的助熔剂







Hard-surfacing




D 667

EDZCr-B-15

HRc48. Resistance to wear, gas  corrosion and oxidation. Hardfacing of blast furnace hopper and cracker  part.
HRc48,耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件


D 802

EDCoCr-A-03

HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of  high temperature part such as the edge of thermo-cutter.
HRc38-47,耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃

ECoCr-A

D 812

EDCoCr-B-03

HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of  high temperature part such as internal-combustion engine valve.
HRc45-50,耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀

ECoCr-B

D 822


HRc53. Resistance to Wear and  heat, bad shock resistance. Hardfacing of rotating blade wheel of  boiler.
HRc53,耐热、耐磨,但抗冲击性差。堆焊锅炉旋转叶轮


D 832

EDCoCr-C-03

HRc50. Wear and heat  resistance. Hardfacing of high temperature part such as hot-rolling guided  way.
HRc50,耐热、耐磨。堆焊高温工件如热轧导轨

ECoCr-C

D 842

EDCoCr-D-03

HRc28-38. Corrosion and thermo-fatigue resistance, work  harding. Hardfacing of hot forging die.
HRc28-38,耐蚀、抗热疲劳,具有加工硬化性。堆焊热锻模



 

Cast iron



Z 308

EZNi

Pure nickel, excellent general properties. Used to weld thin  cast iron part and repair welding machined surface, such as guided way of  machine tool.
纯镍,综合性能好。铸铁薄件及加工面补焊用,如机床导卫

ENi-Cl

Z 408

EZNiFe

Iron nickel, high strength and excellent ductility. Repair  welding of important gray cast iron and nodular cast iron, such as cylinder  cap.
镍铁,强度高、塑性好。重要灰铸铁及球铁焊补用,如汽缸盖

ENiFe-Cl

Z 508

EZNiCu-1

Copper nickel, good machinability and bad crack resistance.  Repair welding of sand hole and gray cast iron machined surface subject to no  load.
镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊

ENiCu-B


 

Copper alloys




Cu 107

ECu

Red copper, atmosphere and sea water corrosion and excellent  electric conductivity. Welding of red copper such as electrical copper  row.
紫铜,耐大气,海水腐蚀,导电性好。紫铜焊接用,如导电铜排

ECu

Cu 207

ECuSi

Silicon bronze, corrosion resistance and high strength. Welding  of copper, silicon bronze and brass.
硅青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用

ECuSi

Cu 227

ECuSnB

Tin phosphor bronze, corrosion resistance and high strength.  Welding of copper, silicon bronze and brass.
锡磷青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用

ECuSn-C

Cu 237

ECuAl

Aluminum bronze, wear and corrosion and high strength. Welding  or surfacing of copper alloys.
铝青铜,耐磨、耐蚀,强度高。铜合金焊接或堆焊用

ECuAl-A2


Aluminum alloys


Al 109

TAl

Pure aluminum, excellent corrosion resistance and middle  strength. Welding of pure aluminum.
纯铝,耐蚀性好,但强度不高,纯铝焊接用

E1100

Al 209

TAlSi

Silicon aluminum, good crack resistance and wide range of  usage. Welding of aluminum alloys other than aluminum magnesium alloys.
铝硅,抗裂性好,通用性大。铝合金焊接用,不宜焊接铝镁合金

E4043

Al 309

TAMn

Manganese aluminum, corrosion resistance and high strength.  Welding of aluminum alloys.
铝锰,强度高,耐蚀。铝合金焊接用

E3003


Nickel alloys

镍合金

Ni 102

ENi-1

Pure nickel. Welding and surfacing of nickel and nickel to  steel.
纯镍,用于镍、镍与钢的焊接与堆焊

ENi-1

Ni 207

ENiCu-7

Copper nickel. Welding and surfacing of copper nickel and  copper nickel to steel.
镍铜,用于镍铜、镍铜与钢的焊接与堆焊

ENiCu-7








Hardfacing





S 101

C3 Cr28 Ni4
Si3.5 Fe Rem.

HRc48-54. Resistance to wear, gas corrosion and oxidation.  Hardfacing of bucket tooth and case pump.
HRc48-54,耐磨、耐气蚀、抗氧化。堆焊铲斗齿,泵套


S 111

C1 Cr29 W5
Co Rem.

HRc38-47. Resistance to wear and corrosion at high-temperature.  Hardfacing of high temperature and pressure valve.
HRc38-47,高温下耐磨、耐蚀。堆焊高温高压阀门

ECoCr-A

S 112

C1.5 Cr29 W8
Co Rem.

HRc45-50. Resistance to wear and corrosion at high-temperature.  Hardfacing of valve and hot-rolling pass.
HRc45-50,高温下耐磨、耐蚀。堆焊阀门,热轧孔型

ECoCr-B

S 113

C2.5 Cr30 W17
Co Rem.

HRc55. Wear and heat  resistance at high temperature, bad shock resistance. Hardfacing of screw  charging carriage.
HRc55,高温下耐磨、耐热,但抗冲击性差。堆焊螺旋送料机用


S 114

C2.5 Cr30 W12
Co Rem.

HRc53. Wear and heat  resistance at high temperature, bad shock resistance. Hardfacing of three-cone  bit.
HRc53,高温下耐磨、耐热,但抗冲击较差。堆焊牙轮钻头

ECoCr-C


Copper

alloys




 


 

S 201

Sn1 Si0.3Mn0.3
Cu Rem.

Good mechanical properties and crack resistance. Gas welding  and argon arc welding of red copper.
机械性能好,抗裂性好。紫铜气焊及氩弧焊用

ERCu

S 211

Si3 Mn1
Cu Rem.

Good mechanical properties. Argon arc welding of copper alloys  and MIG brazing of steel.
机械性能好,铜合金氩弧焊及钢的MIG钎焊用

ERCuSi-Al

S 212

Sn5 Cu Rem.

Wear resistance. Argon arc welding of copper alloys and  surfacing of steel.
耐磨性好。铜合金氩弧焊及钢的堆焊用

ERCuSn-A

S 213

Sn8 Cu Rem.

Wear resistance. Argon arc welding of copper alloys and  surfacing of steel.
耐磨性好。铜合金氩弧焊及钢的堆焊用

ERCuSn-C

S 214

Al7.5 Cu Rem.

Wear and corrosion resistance. Argon arc welding of copper  alloys and surfacing of steel.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用

ERCuAl-A1

S 215

Al9 Cu Rem.

Wear and corrosion resistance. Argon arc welding of copper  alloys and surfacing of steel.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用

ERCuAl-A2

S 221

Cu60 Sn1 Si0.3
Zn Rem.

Melting point is about 890.  Gas welding and carbon arc welding of brass, also braze welding of copper, steel  and cast iron.
熔点约890℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁


S 221F

Cu60 Sn1 Si 0.3
Zn Rem.

S221 welding rod coated with flux.
外涂焊剂的S221焊丝


S 222

Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.

Melting point is about 880.  Gas welding and carbon arc welding of brass, also braze welding of copper, steel  and cast iron.
熔点约880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

RBCuZn-C

S 222F

Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.

S222 welding rod coated with flux.
外涂焊剂的S222焊丝

RBCuZn-C

S 223

Cu59 Sn0.6
Zn Rem.

Melting point is about 900.  Braze welding of copper, steel and cast iron.
熔点约900℃。铜、钢、铸铁钎焊用

RBCuZn-A

S 224

Cu62 Si0.5
Zn Rem.

Melting point is about 905.  Gas welding and carbon arc welding of brass, also braze welding of copper, steel  and cast iron.
熔点约905℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁


Copper
alloys



S 225

Cu48 Ni10
Zn Rem.

Melting point is about 935 and  high strength. Braze welding of steel, nickel and carbide alloys.
熔点约935℃。高强度,钎焊钢、镍及硬质合金用

RBCuZn-D

S 225F

Cu48 Ni10
Zn Rem.

S225 welding rod coated with flux.
外涂焊剂的S225焊丝

RBCuZn-D

S 226

Cu60 Sn0.3
Si0.2 Zn Rem.

Melting point is about 900.  Gas welding of brass, also braze welding of copper, steel and cast  iron.
熔点约900℃。黄铜气焊用,也可钎焊铜、钢、铸铁


S 227

Cu58Sn0.9Ni0.5
Si0.1 Fe0.8
Zn Rem.

Melting point is about 880.  Gas welding and carbon arc welding of brass, also braze welding of copper, steel  and cast iron.
熔点880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

RBCuZn-B

S 229

Cu55 Ni6 Mn4
Zn

Melting point is about 920,  high strength. Braze welding of steel, nickel and hard carbide.
熔点约920℃。高强度,钎焊钢、镍及硬质合金用


Aluminum alloys




S 301

Al99.5

Good ductility and corrosion resistance. Gas welding and argon  arc welding of pure aluminum.
塑性好、耐蚀。纯铝气焊、氩弧焊用

ER1100

S 311

Si5 Al Rem.

Corrosion resistance, wide range of usage. Gas welding and  argon arc welding of aluminum alloys other than high magnesium alloys.
抗裂性好,通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金

ER4043

S 321

Mn1.3 Al Rem.

Good corrosion resistance, weldability and ductility. Gas  welding and argon arc welding of aluminum alloys.
良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用


S 331

Mg5 Mn0.4
Al Rem.

Corrosion resistance and high strength. Argon arc welding of  aluminum alloys.
耐蚀,强度高。铝合金氩弧焊用

ER5183










   LONGTAI© 2019 Longtaihancai.com All Rights Reserved.龙泰焊材版权所有·违者必究

   联系电话:0512-68653444 69389992   地址:苏州市吴中工业园区出口加工区苏虹中路183号 !

   移动电话:18913091444 (微信同号)  E-mail:480540444@qq.com

   龙泰焊材公司专注焊材15年,  我们只做焊材,专业、专注、专心、诚信、合作、互赢。

  • 电话咨询
  • 18913091444
  • 0512-68653444
  • 0512-69389992