加入收藏
您好,欢迎光临龙泰焊接科技(苏州)有限公司官方网站!
0512-68653444
龙泰焊接科技(苏州)有限公司
焊材订购咨询专线
LONGTAI WELDING TECHNOLOGY SUZHOU CO.,LTD.
热门关键词:
产品信息
默认排序
发布时间
1个结果

由于产品型号众多,网站不能全部展示,更多型号请来电咨询!Category类 别Trade-mark牌号Specification规  格MeltingPoint熔点(℃)Chemicalcomposition主要成份(%)Application用 途Equivalentto AWS相当AWSCopperzinc铜锌L103Wire & rod丝885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low  load.钎焊铜、青铜和钢等受力不大工件L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.钎焊硬质合金刀具Copperphosphorus 铜磷L201Cast rod, wire & rod, powder铸条、丝、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜合金BCuP-2L204Cast rod, wire铸条、丝  640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum  etc.钎焊铜及铜合金、银、钼等金属。BCuP-5L205Cast rod, wire & rod, powder铸条、丝、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜合金BCuP-3L207Cast rod, wire & rod铸条、丝640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜合金BCuP-7L209Cast rod, wire铸条、丝  684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜合金。BCuP-6 Silverbase银基L302Wire & rod丝745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel  etc.钎焊铜及铜合金、钢及不锈钢等L303Wire & rod丝660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel  etc.钎焊铜及铜合金、钢及不锈钢等BAg-5L303FFlux coated rod涂药丝  660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂钎剂的L303,用途与L303相同BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.钎焊铜及铜合金、钢等BAg-6L308Wire & rod丝779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing  protective atmosphere.铜和镍的真空或还原保护气氛钎焊  BAg-8L312Wire & rod丝595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel  etc.钎焊铜及铜合金、钢及不锈钢等L313Wire & rod丝625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel  etc.钎焊铜及铜合金、钢及不锈钢等BAg-1aL321Wire & rod丝615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel  etc.钎焊铜及铜合金、钢及不锈钢等BAg-7L323Wire & rod丝665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel  etc.钎焊铜及铜合金、钢及不锈钢等L325Wire & rod丝645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel  etc.钎焊铜及铜合金、钢及不锈钢等BAg-36L326Wire & rod丝650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel  etc.钎焊铜及铜合金、钢及不锈钢等BAg-34Aluminum base铝基L400Cast rod, wire & rod铸条、丝577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.铝及铝合金的钎焊BAlSi-4L401Cast rod铸条525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.铝及铝合金的钎焊Tin lead锡铅L600Wire & rod丝183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔金属及热处理件的钎焊60SnL601Wire & rod丝183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain  sheet.铜及铜合金、镀锌铁皮的钎焊。18SnL602Wire & rod丝183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron  plain sheet.铜、黄铜、铁、镀锌铁皮的钎焊30SnL603Wire & rod丝183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc  parts.铜及铜合金、钢、锌制零件的钎焊40SnL604Wire & rod丝183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine  field.食品、医疗所需铜、钢等金属的钎焊90SnL605Wire & rod丝232-240Ag5 Sn95Soldering of copper and steel for electrical and food  field.电器、食品所需铜、钢等金属的钎焊L608Wire & rod丝295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless  steel.铜及铜合金、钢及不锈钢的钎焊Nickel base镍基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective  atmosphere.不锈钢真空或保护气氛钎焊BNi-2Gaswelding气焊CJ301Copper gas welding flux铜气焊熔剂Melting point is about 650℃,  flux for gas welding and brazing of copper and copper alloys.熔点约650℃,铜及铜合金气焊或钎焊的助熔剂CJ401Aluminum gas welding flux铝气焊熔剂Melting point is about 560℃,  flux for gas welding of aluminum and aluminum alloys.熔点约560℃,铝及铝合金气焊的助熔剂Silverbrazing银钎焊QJ101Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless  steel within 550-750℃.在550-750℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂QJ102Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless  steel within 600-850℃.在600-850℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂QJ102ASilver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless  steel within 600-850℃. Non  agglomeration.在600-850℃范围钎焊铜及铜合金、钢及不锈钢。不易结块QJ112Silver brazing paste flux膏状银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless  steel within 600-850℃.在600-850℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂QJ103Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless  steel within 550-750℃.在550-750℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂Aluminum brazing铝钎焊QJ201Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within  450-620℃.在450-620℃范围钎焊铝及铝合金的助熔剂QJ207Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within  560-620℃.在560-620℃范围钎焊铝及铝合金的助熔剂Hard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas  corrosion and oxidation. Hardfacing of blast furnace hopper and cracker  part.HRc≥48,耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of  high temperature part such as the edge of thermo-cutter.HRc38-47,耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of  high temperature part such as internal-combustion engine valve.HRc45-50,耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀ECoCr-BD 822HRc≥53. Resistance to Wear and  heat, bad shock resistance. Hardfacing of rotating blade wheel of  boiler.HRc≥53,耐热、耐磨,但抗冲击性差。堆焊锅炉旋转叶轮D 832EDCoCr-C-03HRc≥50. Wear and heat  resistance. Hardfacing of high temperature part such as hot-rolling guided  way.HRc≥50,耐热、耐磨。堆焊高温工件如热轧导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work  harding. Hardfacing of hot forging die.HRc28-38,耐蚀、抗热疲劳,具有加工硬化性。堆焊热锻模 Cast iron铸铁Z 308EZNiPure nickel, excellent general properties. Used to weld thin  cast iron part and repair welding machined surface, such as guided way of  machine tool.纯镍,综合性能好。铸铁薄件及加工面补焊用,如机床导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair  welding of important gray cast iron and nodular cast iron, such as cylinder  cap.镍铁,强度高、塑性好。重要灰铸铁及球铁焊补用,如汽缸盖ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance.  Repair welding of sand hole and gray cast iron machined surface subject to no  load.镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊ENiCu-B Copper alloys铜合金Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent  electric conductivity. Welding of red copper such as electrical copper  row.紫铜,耐大气,海水腐蚀,导电性好。紫铜焊接用,如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding  of copper, silicon bronze and brass.硅青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength.  Welding of copper, silicon bronze and brass.锡磷青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding  or surfacing of copper alloys.铝青铜,耐磨、耐蚀,强度高。铜合金焊接或堆焊用ECuAl-A2Aluminum alloys铝合金Al 109TAlPure aluminum, excellent corrosion resistance and middle  strength. Welding of pure aluminum.纯铝,耐蚀性好,但强度不高,纯铝焊接用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of  usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅,抗裂性好,通用性大。铝合金焊接用,不宜焊接铝镁合金E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength.  Welding of aluminum alloys.铝锰,强度高,耐蚀。铝合金焊接用E3003Nickel alloys镍合金Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to  steel.纯镍,用于镍、镍与钢的焊接与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and  copper nickel to steel.镍铜,用于镍铜、镍铜与钢的焊接与堆焊ENiCu-7Hardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation.  Hardfacing of bucket tooth and case pump.HRc48-54,耐磨、耐气蚀、抗氧化。堆焊铲斗齿,泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature.  Hardfacing of high temperature and pressure valve.HRc38-47,高温下耐磨、耐蚀。堆焊高温高压阀门ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature.  Hardfacing of valve and hot-rolling pass.HRc45-50,高温下耐磨、耐蚀。堆焊阀门,热轧孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat  resistance at high temperature, bad shock resistance. Hardfacing of screw  charging carriage.HRc≥55,高温下耐磨、耐热,但抗冲击性差。堆焊螺旋送料机用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat  resistance at high temperature, bad shock resistance. Hardfacing of three-cone  bit.HRc≥53,高温下耐磨、耐热,但抗冲击较差。堆焊牙轮钻头ECoCr-CCopperalloys铜 合 金S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding  and argon arc welding of red copper.机械性能好,抗裂性好。紫铜气焊及氩弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys  and MIG brazing of steel.机械性能好,铜合金氩弧焊及钢的MIG钎焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and  surfacing of steel.耐磨性好。铜合金氩弧焊及钢的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and  surfacing of steel.耐磨性好。铜合金氩弧焊及钢的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper  alloys and surfacing of steel.耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper  alloys and surfacing of steel.耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃.  Gas welding and carbon arc welding of brass, also braze welding of copper, steel  and cast iron.熔点约890℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊剂的S221焊丝S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃.  Gas welding and carbon arc welding of brass, also braze welding of copper, steel  and cast iron.熔点约880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊剂的S222焊丝RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃.  Braze welding of copper, steel and cast iron.熔点约900℃。铜、钢、铸铁钎焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃.  Gas welding and carbon arc welding of brass, also braze welding of copper, steel  and cast iron.熔点约905℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁Copperalloys铜合金S 225Cu48 Ni10Zn Rem.Melting point is about 935℃ and  high strength. Braze welding of steel, nickel and carbide alloys.熔点约935℃。高强度,钎焊钢、镍及硬质合金用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊剂的S225焊丝RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃.  Gas welding of brass, also braze welding of copper, steel and cast  iron.熔点约900℃。黄铜气焊用,也可钎焊铜、钢、铸铁S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃.  Gas welding and carbon arc welding of brass, also braze welding of copper, steel  and cast iron.熔点880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃,  high strength. Braze welding of steel, nickel and hard carbide.熔点约920℃。高强度,钎焊钢、镍及硬质合金用Aluminum alloys铝合金S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon  arc welding of pure aluminum.塑性好、耐蚀。纯铝气焊、氩弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and  argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好,通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas  welding and argon arc welding of aluminum alloys.良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of  aluminum alloys.耐蚀,强度高。铝合金氩弧焊用ER5183

   LONGTAI© 2019 Longtaihancai.com All Rights Reserved.龙泰焊材版权所有·违者必究

   联系电话:0512-68653444 69389992   地址:苏州市吴中工业园区出口加工区苏虹中路183号 !

   移动电话:18913091444 (微信同号)  E-mail:480540444@qq.com

   龙泰焊材公司专注焊材15年,  我们只做焊材,专业、专注、专心、诚信、合作、互赢。

  • 电话咨询
  • 18913091444
  • 0512-68653444
  • 0512-69389992